If you’ve decided to install new speakers in your car to enjoy your playlist on the road and you’re looking for a warm, airy and powerful system, the new 165LSQ speaker system from the BLAM LIVE range is for you. This 6.5 Inch (165mm) component speaker set is at the cutting edge of technology and design. The innovative sound concept and focus on the "vinyl" sound dynamic creates a sound result that is characterized by fascinating warmth, dynamics and smoothness. Quality is a top priority here and is reflected in the high-quality materials used, such as the cellulose fiber cones reinforced with bamboo fibers, as well as the system's features, which include two 165 mm woofers, two 25 mm soft dome tweeters and crossovers. The optimum control and sound generation of this speaker set gives your sound a unique and authentic sound image.
Product Features
- High efficiency Sound quality 2-way component system
- 165 mm (6.5’’) woofer
- Max power 120 W – Nominal power 60 W
- Frequency response 60 Hz – 25 kHz
- Sensitivity (2,83V/1m) 94 dB – Impedance 2 Ω
Composition
165LSQ HIGH EFFICIENCY WOOFER
- 165 mm (6.5″) woofer
- Max power 120 W
- Nominal power 60 W
- Frequency response 60 Hz – 9 kHz
- Sensitivity 94 dB
- Impedance 2 Ω
- Moulded and machined aluminium basket – Cellulose pulp membrane reinforced with bamboo fibers – Butyl perimeter surround – Long life spider “Conex” – 28 mm coil on kapton support – 80 mm x 15 mm magnetic motor – 5 mm thick magnetic circuit
LT25 HIGH QUALITY TWEETER
- 25 mm (1’’) high quality soft dome tweeter
- Max power 100 W
- Nominal power 15 W
- Frequency response 2.5 kHz – 25 kHz
- Sensitivity 91.6 dB
- Impedance 3 Ω
- High efficiency N38 neodymium motor
BFW01 HIGH QUALITY CROSSOVER
- Low pass 6 dB/octave crossover
BFT01 HIGH QUALITY CROSSOVER
- High pass 12 dB/octave crossovers
- Adjustable tweeter level to +3 dB, 0 dB or attenuated -3 dB
Technical Specifications
- Component Woofer
- Max power 120 W
- Nominal power 60 W
- Impedance 2 Ω
- Freq. Response 74 Hz - 9 KHz
- Sensitivity (2,83V/1m) 93.3 dB
- Magnet Ferrite
- Magnet size Ø x h 80 x 15 mm 3.15“x 0.591“
- Total driver displacement 0.3 l 0.011 cf
- Weight of one component 0.922 kg 2.033 lb
- Voice coil Ø 28 mm 1.102“
- Voice coil height 11 mm 0.433“
- Cone Paper & Bamboo
Technical Parameters
- effective Ø (d) 130 mm
- Sd 132.73 cm2
- Xmax 3 mm
- Re 2.3 Ω
- Fs 79.06 Hz
- Le 99.64 µH @ 1 kHz
- Le 233.56 µH @10 kHz
- Vas 7.37 L
- Mms 13.6 g
- Cms 0.000298 m/N
- BL 4.13 Tm
- Qts 0.73
- Qes 0.91
- Qms 3.71
- Sensitivity (dB/W/m) 87.9 dB
Accessories Included
- Mounting screws
- Mounting accessories for tweeters
- User manual
Technical Specifications Sheet
Dimensions
You might also require (Sold Separately)
- Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
- Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
- Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
- Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion.
- Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
- Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.
- Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.
Brand: BLAM
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Any Car - Any Car (No year)
Ford - C-MAX 1st Gen (C214) (2003 - 2010)
Ford - EcoSport 2nd Gen (2013 - 2019)
Ford - Edge (CD539) (2015 - 2021)
Nissan - NV200 (2010 - 2019)
Tesla - Model 3 (2017 >)
Tesla - Model S (2012 >)
Tesla - Model X (2015 >)
Tesla - Model Y (2020 >)
