BLAM SIGNATURE S 165N45+ High Fidelity 165mm (6.5 inch) SLIM 120W 2-way component speaker system

PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability

Discover the SIGNATURE S 165N45 + from BLAM, a high quality 6.5 Inch (165mm) SLIM component speaker set. With an installation depth of just 74mm, this system is characterized by its slim 2-way component speakers equipped with high-resolution soft-dome tweeters and 4 external crossovers. It's ultra-rigid carbon woofer cone provides a powerful sound and excites with any style of music without sacrificing resolution. With a power handling capacity of 75 watts RMS, impedance of 2 ohms and a sensitivity of 94.3 dB, the S 165N45 + speaker set offers impressive technical features.

System includes two 165 mm (6,5”) woofers, two 20 mm (3/4’’) high resolution soft dome tweeters and four external crossovers.

Composition

WS 6.45 HIGH FIDELITY WOOFER

• 6.5 Inch (165 mm) woofer
• Max power 120 W
• Nominal power 75 W
• Frequency response 60 Hz – 7 kHz
• Sensitivity 94.3 dB
• Impedance 2 Ω
• Cast aluminium bowl – Ultra rigid carbon fiber diaphragm – IIR perimeter suspension – Long life spider “conex” – 34mm coil on fiberglass backing – High end neodymium motor – Gold plated terminal block.

TS 20 HR HIGH RESOLUTION TWEETER

• 20mm (3/4 Inch) soft dome diaphragm
• Frequency response 2.5 KHz-43kHz
• Sensitivity 88.3 dB
• Impedance 5 Ω
• Compact mounting dimensions – High efficiency magnet (N38H neodymium) – Ferrofluid for high power handling – Inclined mounting bracket.

BFT 01 HIGH QUALITY CROSSOVER

• 12 dB/octave high-pass filter
• Adjustable tweeter level +3 dB, 0 dB or -3 dB

BFW 01 HIGH QUALITY CROSSOVER

• Low pass 6 dB/octave crossover

Technical Specifications

• Component Woofer
• Max power 150 W
• Nominal power 75 W
• Impedance 3 Ω
• Freq. Response 55 Hz - 5 KHz
• Sensitivity (2,83V/1m) 91,1 dB
• Magnet Neodymium
• Magnet size Ø x h 24 x 10 mm 0,945‘’x 0,394 ‘’
• Total driver displacement 0,3 l 0,011 cf
• Weight of one component 1,25 kg 2,756 lb
• Voice coil Ø 32 mm 1,260“
• Voice coil height 12 mm 0,472“
• Cone Carbon fiber

Technical Specifications Sheet

Dimensions

You might also require (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
• Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
• Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
• Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion. 
• Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.