PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.
Suitable for Subaru vehicle models (2007-2013) with original Kenwood Navigation head unit.
Steering wheel control interface and camera adapter cable Subaru vehicles (2007-2013) with original Kenwood Navigation head unit.
The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.
The cable also provides a speed pulse (for GPS) reverse output (for reverse camera) and handbrake output signal to the new stereo. The interface includes retention for the original reverse camera, and includes a 12v-6v voltage dropper, already hard wired for plug and play installation.
The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.
Compatible with the following car models with original Kenwood navigation head unit:
Subaru
Forester (SH) (2008 - 2012)
Impreza (2007 - 2011)
Liberty Exiga (2008 - 2018)
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Subaru - Forester 3rd Gen (SH) (2008 - 2014)
Subaru - Impreza (2007 - 2011)
Subaru - Liberty Exiga (2008 - 2018)
